|
CREATION - THE ADDITIVE SPECIALIST
for Industry and the Automobile Sector
-
Reduce friction and wear through better lubrication using special extreme pressure agents.
-
Increases the life of the engine, making it more efficient and environmentally friendly. Reduce oil temperature, making starting easier.
-
Offer deep penetrating protection, especially when normal lubrication levels are low or when oil is contaminated by water.
-
Reduces the risk of oxidation, corrosion, breakdowns and added maintenance costs.
-
Cleans away harmful solids, engine varnish and carbon deposits.
-
Gives pistons, rings and cylinders a general clean.
-
Will not clog filters and will not wash away. Ideal for diesel cars, and any of today’s high-value, high-pressure engines.
DIRECTIONS FOR USE
Application : 350 mls. for 3 to 6 litres engine oil
CREATION : THE ADDITIVE SPECIALIST
POWERZONE OIL & METAL CONDITIONAL ADDITIVE
( SIRIM Tested )
POWERZONE OIL & METAL CONDITIONAL ADDITIVE
This is an Anti-Friction Additive. The engine oil carries it through parts of the engine. It has
two functions:
-
It cleans the engine freeing it of lacquer, sludge, minute metal shavings and contaminants.
-
It works to polish the metal surfaces, penetrating to the pores of the metal to seal off microscopic cracks and breaks and to smooth points of uneven wear.
-
It penetrates metal surfaces and contains no solids. It will not cause any material build-up nor will it change even the finest tolerances. It improves engine efficiency by withstanding extreme pressure and by reducing friction and heat.
Attributes of Powerzone Oil & Metal Conditional Additive.
It Tunes Your Engine While You Drive.
-
Powerzone Additive - Less Consumption. It will reduce the temperature of any engine by 10o due to reduction of internal friction. Environmentally friendly.
-
Powerzone Additve - More Performance. It will increase the compression of any engine by 10 lbs per cylinder by forming a hydraulic seal between the piston ring and the cylinder wall. Environmentally friendly.
-
Powerzone Additive - Lower Idling Speed. It will cut your trolling speed of your outboard motor by from 100rpm to 300rpm. Environmentally friendly.
-
Powerzone Additive - More Power. It will increase the RPM of any engine from 100 to 300.
-
Powerzone Additive - More Speed. It will increase the top speed for your motorcycle from between 10 and 20 kms. per hour.
Cash Benefits
a) Less fuel consumption means less purchases at the petrol pump.
b) Better performance means less consumption.
c) Cleaner engine means less maintenance, less breakdowns.
d) Slower idling speed means less noise pollution, less consumption.
e) Cleaner engine means environmentally friendly.
Application
300 mls. to 5 litres engine oil for 5,000 - 10,000kms oil change.
|
CREATION : THE ADDITIVE SPECIALIST
POWERZONE ENGINE OIL - COST EFFECTIVENESS
| A) Normal Duration between Oil Changes FOR standard Oils |
180-200 hours |
| B) POWERZONE Special Formulated Oil - Duration of Oil Change |
600 Hours |
CALCULATION
A) Standard Oil Change Service Life Cycle of 180/200 hours. Vehicle works 8 hrs/day
| Cycle = |
180 hours oil lifespan
8 hours per working day |
= 22.5 days/cycle oil change |
| Number of Cycle Oil Changer per Vehicle/Year = |
365 days/year
22.5 days/cycle |
= 16.22 times/year/vehicle |
Total number of oil changes using STANDARD oil for 100 vehicles
= 100 X 16.22 TIMES 1622 OIL CHANGES |
B) POWERZONE Special Formulated Oil Change Cycle of 600 hours.Vehicle works 8 hrs/day
| Cycle = |
600 hours Oil Life Span
8 hours per working day |
= 75 days/cycle oil change |
| Number of Cycle Oil Changer per vehicle/year = |
365 days/year
75 days/cycle |
= 4.86 times/year/vehicle |
Total number of oil changes using POWERZONE Special Formulated Oil for 100 vehicles
= 100 X 4.86 TIMES 486 OIL CHANGES |
| Saving between Normal Oil and POWERZONE Special Formulated Oil ; 1622 - 486 = 1136 OIL CHANGES
TOTAL SAVING = 1136 Oil Changes - Imagine the saving in working hours.
| |
| Bio Petrol/Diesel Additive |
 |
 |
 |
|
DEMO Video >>>>>
CREATION - THE ADDITIVE SPECIALIST
for Industry and the Automobile Sector
- Reduce heat/temperature
- Save fuel/Diesel consumption and cleans fuel/Diesel system
- Reduces engine noise
- Reduced air pollution
- Engine performance smoother and give longer piston life
- Applicable to Petrol and Diesel fuel Engine and Machinery
DIRECTIONS FOR USE
Application : 2 ml for 1 litres Petrol/Diesel
CREATION : THE ADDITIVE SPECIALIST
BIO PETROL/DIESEL ADDITIVE
FOR INDUSTRY AND AUTOMOBILE USE
( SIRIM Tested )
|
Presentation and demonstration in Phuket, Thailand on 02/08/2010
In attendance : Mr. Raywat Aeeroub, Member of Parliament, Phuket
Organized by Mr. Cheng Tek Beng & Mr. Frankie Chua of FES Sdn. Bhd.
It was a conventional test whereby the emphasis was on the smoke emission, which was physically seen with our eyes on the tremendous reduction on adding biofuel. Owners was astonished and amazed after test driving their vehicles and the results was satisfying.
The MP was in awe and presented us a letter of appreciation, fully supporting our suggestion of a possible joint distribution of our products in Thailand.
|
 
TESTIMONIAL
I am a chemical Engineer by profession, what Mr.Roy did was fantastic.
He, not only managed to break the molecules in the oil, but also managed to boost up the consumption of the fuel by 25% to 30%.
Being a Malaysian, I'm amazed. He should win a noble prize for this.
Seeing this opportunity, I signed straight away, an MOU to be a distributor in the Europe market.
Try it first , than you know what I'm talking about !!!
Mr.Per Vejrum Pape.
President, Denmark Solar Industry. Denmark | | |
|
